Department of  
Environmental Protection
Division of Air Resource Management

SUBMITTED APPLICATION REPORT
APPLICATION FOR AIR PERMIT - NON-TITLE V SOURCE
Application Number:    8937- 1
Application Name:    AIR - MINOR SOURCE - TRACK LINE LLC - DUNNELLON (FL)
Date Submitted:    29 August 2025

I. APPLICATION INFORMATION
Identification of Facility
1. Facility Owner/Company Name: TRACK LINE, LLC
2. Site Name: DUNNELLON FACILITY
3. Facility Identification Number:   Unknown
4. Facility Location:
  Street Address or Other Locator: undeveloped industrial site owned by and connected to CSX railroad line
  20365 E McKinney Avenue
  City: DUNNELLON County: MARION Zip Code: 34432
5. Relocatable Facility?
    Yes   No
6. Existing Permitted Facility?
    Yes   No

Application Contact
1. Application Contact Name: Application Contact Job Title:
  ROGER SMITH Environmental Engineer
2. Application Contact Mailing Address:
 
Organization/Firm: LAYTON ENVIRONMENTAL ENGINEERING, LLC
Street Address: 1900 CRESTWOOD BLVD
  STE 114
City: BIRMINGHAM State: AL Zip Code: 35210-2056
3. Application Contact Telephone Numbers:
 
Telephone: (205) 580-1946 ext. Fax:
  Application Contact Email Address: ROGERSMITH@LAYTONEE.COM

Purpose of Application
Air Operation Permit Application
This Application for Air Permit is submitted to obtain: (Check one)
Initial non-Title V air operation permit for one or more existing, but previously unpermitted, emissions units.
Initial non-Title V air operation permit for one or more newly constructed or modified emissions units.
     Current construction permit number: 
Non-Title V air operation permit revision to address one or more newly constructed or modified emissions units.
     Current construction permit number: 
     Operation permit number to be revised: 
Initial non-Title V air operation permit under Rule 62-210.300(2)(b), F.A.C., for an existing facility seeking classification as a synthetic non-Title V source.
     Current operation/construction permit number(s): 
Non-Title V air operation permit revision for a synthetic non-Title V source. Give reason for revision; e.g., to address one or more newly constructed or modified emissions units.
     Operation permit number to be revised: 
     Reason for revision: 
 
Air Construction Permit Application
This Application for Air Permit is submitted to obtain: (Check one)
Air construction permit to construct or modify one or more emissions units.
Air construction permit to make federally enforceable an assumed restriction on the potential emissions of one or more existing, permitted emissions units.
Air construction permit for one or more existing, but unpermitted, emissions units.

Owner/Authorized Representative Statement
1. Owner/Authorized Representative Name: Owner/Authorized Representative Job Title:
  ROGER SMITH Environmental Engineer
2. Owner/Authorized Representative Mailing Address:
 
Organization/Firm: LAYTON ENVIRONMENTAL ENGINEERING
Street Address: 1900 CRESTWOOD BLVD
  STE 114
City: BIRMINGHAM State: AL Zip Code: 35210-2056
3. Owner/Authorized Representative Telephone Numbers:
 
Telephone: (205) 580-1946 ext. Fax:
  Owner/Authorized Representative Email Address: ROGERSMITH@LAYTONEE.COM
4. Owner/Authorized Representative Statement:
  By entering my PIN below, I certify that I am the owner or authorized representative of the facility addressed in this application.  I hereby certify, based on information and belief formed after reasonable inquiry, that the statements made in this application are true, accurate and complete and that, to the best of my knowledge, any estimates of emissions reported in this application are based upon reasonable techniques for calculating emissions.  The air pollutant emissions units and air pollution control equipment described in this application will be operated and maintained so as to comply with all applicable standards for control of air pollutant emissions found in the statutes of the State of Florida and rules of the Department of Environmental Protection and revisions thereof.  I understand that a permit, if granted by the department, cannot be transferred without authorization from the Department, and I will promptly notify the Department upon sale or legal transfer of the facility or any permitted emissions unit.

Professional Engineer Certification
1. Professional Engineer Name: Professional Engineer Job Title:
  KENNETH LAYTON PE/Consultant
  Registration Number: 43621  
2. Professional Engineer Mailing Address:
 
Organization/Firm: LAYTON ENVIRONMENTAL ENGINEERING LLC
Street Address: 1900 CRESTWOOD BLVD
  SUITE 114
City: BIRMINGHAM State: AL Zip Code: 35210
3. Professional Engineer Telephone Numbers:
 
Telephone: (205) 951-3700 ext. Fax:
  Professional Engineer Email Address: KEN@LAYTONEE.COM
4. Professional Engineer Statement:
 
I hereby certify, except as particularly noted herein*, that:

(1) To the best of my knowledge, there is reasonable assurance that the air pollutant emissions unit(s) and the air pollution control equipment described in this Application for Air Permit, when properly operated and maintained, will comply with all applicable standards for control of air pollutant emissions found in the Florida Statutes and rules of the Department of Environmental Protection; and

(2) To the best of my knowledge, any emission estimates reported or relied on in this application are true, accurate, and complete and are either based upon reasonable techniques available for calculating emissions or, for emission estimates of hazardous air pollutants not regulated for an emissions unit addressed in this application, based solely upon the materials, information and calculations submitted with this application.

If the purpose of this application is to obtain an air construction permit for one or more proposed new or modified emissions units (check here , if so), I further certify that the engineering features of each such emissions unit described in this application have been designed or examined by me or individuals under my direct supervision and found to be in conformity with sound engineering principles applicable to the control of emissions of the air pollutants characterized in this application.

If the purpose of this application is to obtain an initial air operation permit or operation permit revision or renewal for one or more newly constructed or modified emissions units (check here , if so), I further certify that, with the exception of any changes detailed as part of this application, each such emissions unit has been constructed or modified in substantial accordance with the information given in the corresponding application for air construction permit and with all provisions contained in such permit.

* Explain any exception to the certification statement.
  Professional Engineer Exception Statement:
 

Scope of Application
Emissions Unit ID Number Description of Emissions Unit Permit Type
Shredding and Grinding of Wooden Railroad Ties AC1C

Note: The fee calculation information associated with this application may be accessed from the Main Menu of ESPAP.

Construction/Modification Information
1. Description of Proposed Project or Alterations:
  The proposed project involves the installation and operation of a facility to shred and grind creosote-treated railroad ties (CTRT) into a 1-inch minus fuel product for shipment to cement kilns permitted to use the material as a beneficial secondary. Operations will employ two mobile, track-mounted Tier 4 diesel-powered units—a shredder and a grinder. All processed material will be loaded directly into live bed trailers (trucks) beneath a mobile dome canopy. There will be no outdoor storage of processed product; material will be shipped off-site immediately upon completion of processing or once trailers are fully loaded.
2. Projected or Actual Date of Commencement of Construction:  29-SEP-25
3. Projected Date of Completion of Construction:  01-OCT-25

Application Comment
Project schedule is subject to timely completion of construction permitting.

II. FACILITY INFORMATION
A. GENERAL FACILITY INFORMATION
Facility Location and Type
1. Facility UTM Coordinates:
  Zone 17 East (km): 359.19 North (km): 3216.44
2. Facility Latitude/Longitude:
  Latitude (DD/MM/SS) 29º 4` 6.5" N Longitude (DD/MM/SS) 82º 26` 47.5" W
3. Governmental Facility Code:
  (0) NOT OWNED OR OPERATED BY A FEDERAL, STATE, OR LOCAL GOVERNMENT
4. Facility Status Code:
  Construction
5. Facility Major Group SIC Code:
  (24) LUMBER & WOOD PRODUCTS, EXCEPT FURNITURE
6. Facility SIC(s):
  Primary: 2499
7. Facility Comment:
 

Facility Contact
1. Facility Contact Name: Facility Contact Job Title:
  DAVE MALAY Chief Executive Office (CEO)
2. Facility Contact Mailing Address:
 
Organization/Firm: TRACK LINE, LLC
Street Address: 700 N CARROLL AVE
  STE 110
City: SOUTHLAKE State: TX Zip Code: 76092
3. Facility Contact Telephone Numbers:
 
Telephone: (312) 848-1812 ext. Fax:
  Facility Contact Email Address: DMALAY@TRACKLINERAIL.COM


Facility Regulatory Classifications
Check all that apply:
1.   Small Business Stationary Source?   Unknown
2.   Synthetic Non-Title V Source?
3.   Synthetic Minor Source of Pollutants Other than HAPs?
4.   Synthetic Minor Source of HAPs?
5.   One or More Emissions Units Subject to NSPS?
6.   One or More Emissions Units Subject to NESHAP Recordkeeping or Reporting?
12. Facility Regulatory Classifications Comment:
  NESHAP ZZZZ compliance demonstrated by compliance with NSPS IIII

Rule Applicability Analysis
Subject to Rule 62-210.300, F.A.C., this facility is a new minor source (not exempt under 62-210.300(3)); application is submitted under Rule 62-210.900(3), F.A.C. Preconstruction review is required by Rule 62-212.300, but the project does not trigger PSD since PTE is well below major source thresholds using conservative assumptions. Two Tier 4 diesel engines, considered stationary (onsite >12 months, manufactured after April 1, 2006), are subject to NSPS Subpart IIII standards for operation, maintenance, recordkeeping, and reporting. Both engines are also “new” under NESHAP Subpart ZZZZ (area source of HAPs); compliance with NSPS IIII fully satisfies ZZZZ per 40 CFR 63.6590(c), so no additional controls or testing required. As required by Chapter 62-296, visible emissions from engines and material handling will not exceed 20% opacity, demonstrated by EPA Method 9, with reasonable precautions (covered handling, vegetated buffer, direct loading, dust suppression) to prevent unconfined PM emissions. No add-on controls are installed; compliance relies on Tier 4 engine certification, ultra-low-sulfur diesel, and good practices. Facility is a true minor source (no synthetic limits or caps); no NESHAP applies beyond ZZZZ “by reference.” Project is not subject to emissions cap-and-trade, offsets, local air programs, or special modeling/monitoring under current rules.

B. FACILITY POLLUTANTS
List of Pollutants Emitted
1. Pollutants Emitted
2. Pollutant Class.
3. Requested Emissions Cap
lb/hour tons/year
4. Basis for Emissions Cap
5. Pollutant Comment
CO B         
CPM ND         
H001 B         
H006 B         
H017 B         
H095 B         
H132 B         
H151 B         
H169 B         
H186 B         
HAPS B         
NOX B         
PM B         
PM10 B         
PM10-PRI B         
PM2.5 B         
PM2.5-PRI B         
SO2 B         
VOC B         

C. FACILITY SUPPLEMENTAL INFORMATION
Supplemental Requirements
1. Area Map Showing Facility Location
  Applicable Waiver Requested Attachment
2. Facility Plot Plan
  Applicable Waiver Requested Attachment
3. Process Flow Diagram(s)
  Applicable Waiver Requested Attachment
4. Precautions to Prevent Emissions of Unconfined Particulate Matter
  Applicable Waiver Requested Attachment
5. Supplemental Information for Construction Permit Application
  Applicable Attachment
6. Supplemental Information Comment:
   

Facility Attachments
Supplemental Item Electronic File Name Attachment Description Electronic Document Date Uploaded
Area Map Showing Facility Location fig 3_area+topo map_compressed.pdf Facility Location and Topographic Map Yes 08/13/2025
Facility Plot Plan fig 2_plot plan.pdf Plot Plan Yes 08/13/2025
Process Flow Diagram(s) fig 1_flow diagram_TL-Dunnellon.pdf Process Flow Diagram Yes 08/13/2025
Precautions to Prevent Emissions of Unconfined Particulate Matter Precautions to Prevent Emissions of Unconfined PM.pdf PRECAUTIONS TO PREVENT EMISSIONS OF UNCONFINED PM Yes 08/13/2025

III. EMISSIONS UNIT INFORMATION
A. GENERAL EMISSIONS UNIT INFORMATION
Emissions Unit Description and Status
1. Type of Emissions Unit Addressed in this Section: (Check one)
  This Emissions Unit Information Section addresses, as a single emissions unit, a single process or production unit, or activity, which produces one or more air pollutants and which has at least one definable emission point (stack or vent).
  This Emissions Unit Information Section addresses, as a single emissions unit, a group of process or production units and activities which has at least one definable emission point (stack or vent) but may also produce fugitive emissions.
  This Emissions Unit Information Section addresses, as a single emissions unit, one or more process or production units and activities which produce fugitive emissions only.
2. Description of Emissions Unit Addressed in this Section:
  Shredding and Grinding of Wooden Railroad Ties
3. Emissions Unit Identification Number: No ID
  ID:  
4. Emissions Unit Status Code:
  C - Construction
5. Initial Startup Date:
  01-OCT-25
6. Emissions Unit Major Group SIC Code:
  24
7. Emissions Unit Comment:
 

Emissions Unit Control Equipment
Code Equipment Description
0 UNCONTROLLED
Emissions Unit Details
1. Package Unit:
  Manufacturer: Model Number:
2. Generator Nameplate Rating: MW
3. Incinerator Information:
  Dwell Temperature: º F
  Dwell Time: seconds
  Incinerator Afterburner Temperature: º F
Emissions Unit Operating Capacity and Schedule
1. Maximum Heat Input Rate: million Btu/hr
2. Maximum Incineration Rate: pounds/hr
  tons/day
3. Maximum Process or Throughput Rate: 1600  TONS/DAY
4. Maximum Production Rate: 75000  TPY
5. Requested Maximum Operating Schedule:
  24 hours/day 7 days/week
  52 weeks/year 8760 hours/year
6. Operating Capacity/Schedule Comment:
 

B. EMISSION POINT (STACK/VENT) INFORMATION
Emission Point Description and Type
1. Identification of Point on Plot Plan or Flow Diagram:
 
2. Emission Point Type Code:
  4 - No true emission point
3. Descriptions of Emission Points Comprising this Emissions Unit for VE Tracking:
 
4. ID Numbers or Descriptions of Emission Units with this Emission Point in Common:
   
5. Discharge Type Code:
  (F) FUGITIVE EMISSIONS, NO STACK EXISTS
6. Stack Height:
  feet
7. Exit Diameter:
  feet
8. Exit Temperature:
  º F
9. Actual Volumetric Flow Rate:
  acfm
10. Water Vapor:
  %
11. Maximum Dry Standard Flow Rate:
  dscfm
12. Nonstack Emission Point Height:
  feet
13. Emission Point UTM Coordinates:
  Zone: East (km): North (km):
14. Emission Point Comment:
 

C. SEGMENT (PROCESS/FUEL) INFORMATION
Segment Description and Rate:    Segment 1 of 2
1. Segment Description (Process/Fuel Type):
  Diesel Fuel
2. Source Classification Code (SCC):
  20200107
3. SCC Units:
  1000 Gallons Distillate Oil (Diesel) Burned
4. Maximum Hourly Rate:
  1000
5. Maximum Annual Rate:
  176485
6. Estimated Annual Activity Factor:
  176.5
7. Maximum % Sulfur:
  .0015
8. Maximum % Ash:
  0
9. Million Btu per SCC Unit:
  137
10. Segment Comment:
  units are gal/h, gal/yr, units/yr, %, %, MMBtu/SCC Unit, respectively -- worst-case/continuous/full load PTE scenario
  Is this a valid segment?  Yes

Segment Description and Rate:    Segment 2 of 2
1. Segment Description (Process/Fuel Type):
   
2. Source Classification Code (SCC):
  30700802
3. SCC Units:
  Tons Logs Processed
4. Maximum Hourly Rate:
 
5. Maximum Annual Rate:
 
6. Estimated Annual Activity Factor:
 
7. Maximum % Sulfur:
 
8. Maximum % Ash:
 
9. Million Btu per SCC Unit:
 
10. Segment Comment:
 
  Is this a valid segment?  Yes

D. EMISSIONS UNIT POLLUTANT DETAIL INFORMATION
Potential Emissions
1. Pollutant Emitted:
  CO - Carbon Monoxide
2. Pollutant Regulatory Code:
  NS
3. Primary Control Device Code:
  0 - UNCONTROLLED
4. Secondary Control Device Code:
  0 - UNCONTROLLED
5. Total Percent Efficiency
  of Control:
6. Potential Emissions:
16.51  lb/hour 67.22  tons/year
7. Synthetically Limited?
   Yes  No
8. Emission Factor:  
   3.5 GRAMS PER KILOWATT HOUR
Reference:  MANUFACTURER DATA
9. Emissions Method Code:
  (4) CALCULATED BASED ON SIMILAR, BUT DIFFERENT, PROCESS IN AP-42/FIRE SYSTEM OR OTHER PUBLISHED EMISSIONS CALCULATION SOURCE.
10. Calculation of Emissions:
 
11. Pollutant Potential Emissions Comment:
  Certified EF data from CA Air Resources Board
Allowable Emissions
No Pollutant Allowable Emissions information submitted.








Potential Emissions
1. Pollutant Emitted:
  CPM - Condensible Particulate Matter
2. Pollutant Regulatory Code:
  NS
3. Primary Control Device Code:
  0 - UNCONTROLLED
4. Secondary Control Device Code:
  0 - UNCONTROLLED
5. Total Percent Efficiency
  of Control:
6. Potential Emissions:
.256  lb/hour 2.2  tons/year
7. Synthetically Limited?
   Yes  No
8. Emission Factor:  
    
Reference:  
9. Emissions Method Code:
  (3B) CALCULATED USING EMISSION FACTOR FROM AP-42/FIRE SYSTEM OR OTHER PUBLISHED EMISSIONS CALCULATION SOURCE.
10. Calculation of Emissions:
 
11. Pollutant Potential Emissions Comment:
 
Allowable Emissions
No Pollutant Allowable Emissions information submitted.








Potential Emissions
1. Pollutant Emitted:
  H001 - Acetaldehyde
2. Pollutant Regulatory Code:
  NS
3. Primary Control Device Code:
  0 - UNCONTROLLED
4. Secondary Control Device Code:
  0 - UNCONTROLLED
5. Total Percent Efficiency
  of Control:
6. Potential Emissions:
.001  lb/hour .002  tons/year
7. Synthetically Limited?
   Yes  No
8. Emission Factor:  
   .000025 LB/MMBTU
Reference:  AP-42 3.4-3
9. Emissions Method Code:
  (3B) CALCULATED USING EMISSION FACTOR FROM AP-42/FIRE SYSTEM OR OTHER PUBLISHED EMISSIONS CALCULATION SOURCE.
10. Calculation of Emissions:
 
11. Pollutant Potential Emissions Comment:
 
Allowable Emissions
No Pollutant Allowable Emissions information submitted.








Potential Emissions
1. Pollutant Emitted:
  H006 - Acrolein
2. Pollutant Regulatory Code:
  NS
3. Primary Control Device Code:
  0 - UNCONTROLLED
4. Secondary Control Device Code:
  0 - UNCONTROLLED
5. Total Percent Efficiency
  of Control:
6. Potential Emissions:
.0002  lb/hour .001  tons/year
7. Synthetically Limited?
   Yes  No
8. Emission Factor:  
   .000008 LB/MMBTU
Reference:  AP-42 3.4-3
9. Emissions Method Code:
  (3B) CALCULATED USING EMISSION FACTOR FROM AP-42/FIRE SYSTEM OR OTHER PUBLISHED EMISSIONS CALCULATION SOURCE.
10. Calculation of Emissions:
 
11. Pollutant Potential Emissions Comment:
 
Allowable Emissions
No Pollutant Allowable Emissions information submitted.








Potential Emissions
1. Pollutant Emitted:
  H017 - Benzene (including benzene from gasoline)
2. Pollutant Regulatory Code:
  NS
3. Primary Control Device Code:
  0 - UNCONTROLLED
4. Secondary Control Device Code:
  0 - UNCONTROLLED
5. Total Percent Efficiency
  of Control:
6. Potential Emissions:
.02  lb/hour .07  tons/year
7. Synthetically Limited?
   Yes  No
8. Emission Factor:  
   .000776 LB/MMBTU
Reference:  AP-42 3.4-3
9. Emissions Method Code:
  (3B) CALCULATED USING EMISSION FACTOR FROM AP-42/FIRE SYSTEM OR OTHER PUBLISHED EMISSIONS CALCULATION SOURCE.
10. Calculation of Emissions:
 
11. Pollutant Potential Emissions Comment:
 
Allowable Emissions
No Pollutant Allowable Emissions information submitted.








Potential Emissions
1. Pollutant Emitted:
  H095 - Formaldehyde
2. Pollutant Regulatory Code:
  NS
3. Primary Control Device Code:
  0 - UNCONTROLLED
4. Secondary Control Device Code:
  0 - UNCONTROLLED
5. Total Percent Efficiency
  of Control:
6. Potential Emissions:
.001  lb/hour .003  tons/year
7. Synthetically Limited?
   Yes  No
8. Emission Factor:  
   .000039 LB/MMBTU
Reference:  AP-42 3.4-3
9. Emissions Method Code:
  (3B) CALCULATED USING EMISSION FACTOR FROM AP-42/FIRE SYSTEM OR OTHER PUBLISHED EMISSIONS CALCULATION SOURCE.
10. Calculation of Emissions:
 
11. Pollutant Potential Emissions Comment:
 
Allowable Emissions
No Pollutant Allowable Emissions information submitted.








Potential Emissions
1. Pollutant Emitted:
  H132 - Naphthalene
2. Pollutant Regulatory Code:
  NS
3. Primary Control Device Code:
  0 - UNCONTROLLED
4. Secondary Control Device Code:
  0 - UNCONTROLLED
5. Total Percent Efficiency
  of Control:
6. Potential Emissions:
.005  lb/hour .023  tons/year
7. Synthetically Limited?
   Yes  No
8. Emission Factor:  
   .9 LB/LB PRODUCED
Reference:  
9. Emissions Method Code:
  (2) CALCULATED BY USE OF MATERIAL BALANCE AND KNOWLEDGE OF THE PROCESS.
10. Calculation of Emissions:
  shredding/grinding/loading emissions calculated using material testing data, partitioning coefficient methodology, and chemical properties
11. Pollutant Potential Emissions Comment:
 
Allowable Emissions
No Pollutant Allowable Emissions information submitted.








Potential Emissions
1. Pollutant Emitted:
  H151 - Polycyclic organic matter
2. Pollutant Regulatory Code:
  NS
3. Primary Control Device Code:
  0 - UNCONTROLLED
4. Secondary Control Device Code:
  0 - UNCONTROLLED
5. Total Percent Efficiency
  of Control:
6. Potential Emissions:
.14  lb/hour .61  tons/year
7. Synthetically Limited?
   Yes  No
8. Emission Factor:  
    LB/LB PRODUCED
Reference:  
9. Emissions Method Code:
  (2) CALCULATED BY USE OF MATERIAL BALANCE AND KNOWLEDGE OF THE PROCESS.
10. Calculation of Emissions:
  shredding/grinding/loading emissions calculated using material testing data, partitioning coefficient methodology, and chemical properties
11. Pollutant Potential Emissions Comment:
  detailed emission factors and calculation methods outlined in attachments
Allowable Emissions
No Pollutant Allowable Emissions information submitted.








Potential Emissions
1. Pollutant Emitted:
  H169 - Toluene
2. Pollutant Regulatory Code:
  NS
3. Primary Control Device Code:
  0 - UNCONTROLLED
4. Secondary Control Device Code:
  0 - UNCONTROLLED
5. Total Percent Efficiency
  of Control:
6. Potential Emissions:
.006  lb/hour .02  tons/year
7. Synthetically Limited?
   Yes  No
8. Emission Factor:  
   .000281 LB/MMBTU
Reference:  AP-42 3.4-3
9. Emissions Method Code:
  (3B) CALCULATED USING EMISSION FACTOR FROM AP-42/FIRE SYSTEM OR OTHER PUBLISHED EMISSIONS CALCULATION SOURCE.
10. Calculation of Emissions:
 
11. Pollutant Potential Emissions Comment:
 
Allowable Emissions
No Pollutant Allowable Emissions information submitted.








Potential Emissions
1. Pollutant Emitted:
  H186 - Xylenes (isomers and mixtures)
2. Pollutant Regulatory Code:
  NS
3. Primary Control Device Code:
  0 - UNCONTROLLED
4. Secondary Control Device Code:
  0 - UNCONTROLLED
5. Total Percent Efficiency
  of Control:
6. Potential Emissions:
.004  lb/hour .02  tons/year
7. Synthetically Limited?
   Yes  No
8. Emission Factor:  
   .000193 LB/MMBTU
Reference:  AP-42 3.4-3
9. Emissions Method Code:
  (3B) CALCULATED USING EMISSION FACTOR FROM AP-42/FIRE SYSTEM OR OTHER PUBLISHED EMISSIONS CALCULATION SOURCE.
10. Calculation of Emissions:
 
11. Pollutant Potential Emissions Comment:
 
Allowable Emissions
No Pollutant Allowable Emissions information submitted.








Potential Emissions
1. Pollutant Emitted:
  HAPS - Total Hazardous Air Pollutants
2. Pollutant Regulatory Code:
  NS
3. Primary Control Device Code:
  0 - UNCONTROLLED
4. Secondary Control Device Code:
  0 - UNCONTROLLED
5. Total Percent Efficiency
  of Control:
6. Potential Emissions:
.17  lb/hour .75  tons/year
7. Synthetically Limited?
   Yes  No
8. Emission Factor:  
    
Reference:  
9. Emissions Method Code:
  (3B) CALCULATED USING EMISSION FACTOR FROM AP-42/FIRE SYSTEM OR OTHER PUBLISHED EMISSIONS CALCULATION SOURCE.
10. Calculation of Emissions:
  two emission factors - AP-42 used for POC and shredding/grinding/loading emissions calculated using material testing data, partitioning coefficient methodology, and chemical properties
11. Pollutant Potential Emissions Comment:
  detailed emission factors and calculation methods outlined in attachments
Allowable Emissions
No Pollutant Allowable Emissions information submitted.








Potential Emissions
1. Pollutant Emitted:
  NOX - Nitrogen Oxides
2. Pollutant Regulatory Code:
  NS
3. Primary Control Device Code:
  0 - UNCONTROLLED
4. Secondary Control Device Code:
  0 - UNCONTROLLED
5. Total Percent Efficiency
  of Control:
6. Potential Emissions:
16.51  lb/hour 67.22  tons/year
7. Synthetically Limited?
   Yes  No
8. Emission Factor:  
   3.5 GRAMS PER KILOWATT HOUR
Reference:  MANUFACTURER DATA
9. Emissions Method Code:
  (4) CALCULATED BASED ON SIMILAR, BUT DIFFERENT, PROCESS IN AP-42/FIRE SYSTEM OR OTHER PUBLISHED EMISSIONS CALCULATION SOURCE.
10. Calculation of Emissions:
 
11. Pollutant Potential Emissions Comment:
  Certified EF data from CA Air Resources Board
Allowable Emissions
No Pollutant Allowable Emissions information submitted.








Potential Emissions
1. Pollutant Emitted:
  PM - Particulate Matter - PM (Filterable)
2. Pollutant Regulatory Code:
  NS
3. Primary Control Device Code:
  0 - UNCONTROLLED
4. Secondary Control Device Code:
  0 - UNCONTROLLED
5. Total Percent Efficiency
  of Control:
6. Potential Emissions:
13.56  lb/hour 58.77  tons/year
7. Synthetically Limited?
   Yes  No
8. Emission Factor:  
    
Reference:  
9. Emissions Method Code:
  (3B) CALCULATED USING EMISSION FACTOR FROM AP-42/FIRE SYSTEM OR OTHER PUBLISHED EMISSIONS CALCULATION SOURCE.
10. Calculation of Emissions:
  two emission factors applied for shredding/grinding/loading and products of combustion (POC)
11. Pollutant Potential Emissions Comment:
  detailed emission factors and calculation methods outlined in attachments
Allowable Emissions
No Pollutant Allowable Emissions information submitted.








Potential Emissions
1. Pollutant Emitted:
  PM10 - Particulate Matter - PM10 (Filterable)
2. Pollutant Regulatory Code:
  NS
3. Primary Control Device Code:
  0 - UNCONTROLLED
4. Secondary Control Device Code:
  0 - UNCONTROLLED
5. Total Percent Efficiency
  of Control:
6. Potential Emissions:
7.52  lb/hour 32.37  tons/year
7. Synthetically Limited?
   Yes  No
8. Emission Factor:  
    
Reference:  
9. Emissions Method Code:
   
10. Calculation of Emissions:
  two emission factors applied for shredding/grinding/loading and POC
11. Pollutant Potential Emissions Comment:
  detailed emission factors and calculation methods outlined in attachments
Allowable Emissions
No Pollutant Allowable Emissions information submitted.








Potential Emissions
1. Pollutant Emitted:
  PM10-PRI - Particulate Matter - PM10 Primary (Total)
2. Pollutant Regulatory Code:
  NS
3. Primary Control Device Code:
  0 - UNCONTROLLED
4. Secondary Control Device Code:
  0 - UNCONTROLLED
5. Total Percent Efficiency
  of Control:
6. Potential Emissions:
7.78  lb/hour 33.47  tons/year
7. Synthetically Limited?
   Yes  No
8. Emission Factor:  
    
Reference:  
9. Emissions Method Code:
  (3B) CALCULATED USING EMISSION FACTOR FROM AP-42/FIRE SYSTEM OR OTHER PUBLISHED EMISSIONS CALCULATION SOURCE.
10. Calculation of Emissions:
  two emission factors applied for shredding/grinding/loading and POC
11. Pollutant Potential Emissions Comment:
  detailed emission factors and calculation methods outlined in attachments
Allowable Emissions
No Pollutant Allowable Emissions information submitted.








Potential Emissions
1. Pollutant Emitted:
  PM2.5 - Particulate Matter - PM2.5 (Filterable)
2. Pollutant Regulatory Code:
  NS
3. Primary Control Device Code:
  0 - UNCONTROLLED
4. Secondary Control Device Code:
  0 - UNCONTROLLED
5. Total Percent Efficiency
  of Control:
6. Potential Emissions:
4.64  lb/hour 19.73  tons/year
7. Synthetically Limited?
   Yes  No
8. Emission Factor:  
    
Reference:  
9. Emissions Method Code:
  (3B) CALCULATED USING EMISSION FACTOR FROM AP-42/FIRE SYSTEM OR OTHER PUBLISHED EMISSIONS CALCULATION SOURCE.
10. Calculation of Emissions:
  two emission factors applied for shredding/grinding/loading and POC
11. Pollutant Potential Emissions Comment:
  detailed emission factors and calculation methods outlined in attachments
Allowable Emissions
No Pollutant Allowable Emissions information submitted.








Potential Emissions
1. Pollutant Emitted:
  PM2.5-PRI - Particulate Matter - PM2.5 Primary (Total)
2. Pollutant Regulatory Code:
  NS
3. Primary Control Device Code:
  0 - UNCONTROLLED
4. Secondary Control Device Code:
  0 - UNCONTROLLED
5. Total Percent Efficiency
  of Control:
6. Potential Emissions:
4.9  lb/hour 20.83  tons/year
7. Synthetically Limited?
   Yes  No
8. Emission Factor:  
    
Reference:  
9. Emissions Method Code:
  (3B) CALCULATED USING EMISSION FACTOR FROM AP-42/FIRE SYSTEM OR OTHER PUBLISHED EMISSIONS CALCULATION SOURCE.
10. Calculation of Emissions:
  two emission factors applied for shredding/grinding/loading and POC
11. Pollutant Potential Emissions Comment:
  detailed emission factors and calculation methods outlined in attachments
Allowable Emissions
No Pollutant Allowable Emissions information submitted.








Potential Emissions
1. Pollutant Emitted:
  SO2 - Sulfur Dioxide
2. Pollutant Regulatory Code:
  NS
3. Primary Control Device Code:
  0 - UNCONTROLLED
4. Secondary Control Device Code:
  0 - UNCONTROLLED
5. Total Percent Efficiency
  of Control:
6. Potential Emissions:
5.88  lb/hour 23.95  tons/year
7. Synthetically Limited?
   Yes  No
8. Emission Factor:  
   .00205 LB/HP-HR
Reference:  AP-42 3.3-1
9. Emissions Method Code:
  (3B) CALCULATED USING EMISSION FACTOR FROM AP-42/FIRE SYSTEM OR OTHER PUBLISHED EMISSIONS CALCULATION SOURCE.
10. Calculation of Emissions:
 
11. Pollutant Potential Emissions Comment:
 
Allowable Emissions
No Pollutant Allowable Emissions information submitted.








Potential Emissions
1. Pollutant Emitted:
  VOC - Volatile Organic Compounds
2. Pollutant Regulatory Code:
  NS
3. Primary Control Device Code:
  0 - UNCONTROLLED
4. Secondary Control Device Code:
  0 - UNCONTROLLED
5. Total Percent Efficiency
  of Control:
6. Potential Emissions:
.9  lb/hour 3.65  tons/year
7. Synthetically Limited?
   Yes  No
8. Emission Factor:  
   .19 GRAMS PER KILOWATT HOUR
Reference:  MANUFACTURER DATA
9. Emissions Method Code:
  (4) CALCULATED BASED ON SIMILAR, BUT DIFFERENT, PROCESS IN AP-42/FIRE SYSTEM OR OTHER PUBLISHED EMISSIONS CALCULATION SOURCE.
10. Calculation of Emissions:
 
11. Pollutant Potential Emissions Comment:
  Certified EF data from CA Air Resources Board
Allowable Emissions
No Pollutant Allowable Emissions information submitted.








E. VISIBLE EMISSIONS INFORMATION
(Only Emissions Units Subject to a VE Limitation)
Visible Emissions Limitation:    Visible Emissions Limitation 1 of 1
1. Visible Emissions Subtype:
  VE20 - VISIBLE EMISSIONS - 20% NORMAL OPACITY
2. Basis for Allowable Opacity:
   Rule  Other
3. Allowable Opacity:
  Normal Conditions: 20% Exceptional Conditions: 60%
  Maximum Period of Excess Opacity Allowed: 6 min/hour
4. Method of Compliance:
  EPA METHOD 9
5. Visible Emissions Comment:
  Per Rule 62-296.320(4), F.A.C. and 40 CFR Part 60, max 20% opacity except 60% for ≤6 min/hr; applies to engine exhaust

F. CONTINUOUS MONITOR INFORMATION
(Only Emissions Units Subject to Continuous Monitoring)

No Continuous Monitoring information submitted.








G. EMISSIONS UNIT SUPPLEMENTAL INFORMATION
Supplemental Requirements
1. Process Flow Diagram
   Applicable  Waiver Requested  Attachment
2. Fuel Analysis or Specification
   Applicable  Waiver Requested  Attachment
3. Detailed Description of Control Equipment
   Applicable  Waiver Requested  Attachment
4. Description of Stack Sampling Facilities
   Applicable  Waiver Requested  Attachment
5. Compliance Test Report
   Applicable  Previously Submitted, Date:  Attachment
6. Procedures for Startup and Shutdown
   Applicable  Waiver Requested  Attachment
7. Operation and Maintenance Plan
   Applicable  Waiver Requested  Attachment
8. Supplemental Information for Construction Permit Application
   Applicable    Attachment
9. Other Information Required by Rule or Statute
   Applicable    Attachment
10. Supplemental Requirements Comment:
   

Emission Unit Attachments
Supplemental Item Electronic File Name Attachment Description Electronic Document Date Uploaded
Process Flow Diagram fig 1_flow diagram_TL-Dunnellon.pdf process flow diagram Yes 08/13/2025
Supplemental Information for Construction Permit Application tables 1-8_emission calcs.pdf emission calculations Yes 08/13/2025